Swing Dia.1600MM-2500MM(32T) Heavy Duty Large Loading Capacity Manual Conventional Lathe Machine

Product Detail

C61160 / C61200 / C61250 (32T) series of heavy-duty manual manual machine description

This series of lathe bed bed for the overall box-shaped three rectangular guide structure, the use of high standard cast iron (HT300) a molding casting, after the second aging treatment, stable performance, the width of the guide rail 1600mm machine main drive by the 75KW DC motor The main motor and the transmission mechanism through the flexible coupling connection, through the mechanical gears and helical gear vice, the power transmitted to the chuck, so that the chuck to achieve the required torque. Shaft diameter, the box with a split structure, the spindle before and after the support of the two bearing structure, so that the radial and axial stiffness, high rotation accuracy. This series of machine tool holders with manual and mobile two functions. The entire turret consists of a large knife frame, a horizontal turret, a turret, a turret and a small turret. The tool holder has three maneuver feeds, the longitudinal feed of the large tool holder, the horizontal feed of the cross tool holder and the longitudinal feed of the upper tool holder. The tailstock consists of upper and lower body, the upper body is equipped with sleeve, spindle, pressure sensor, the lower body is equipped with tailstock fast moving mechanism, stop the body and the hand pressure pump. (Can also choose ?2000mm and ?1600mm); C61200 with ?2000mm heavy-duty manual four-jaw chuck (you can also choose ?1600mm, ?1800mm). ?1600mm ?1600mm ?1600mm ?1600mm This series of machine tools supply two kinds of center frame, that is, a closed center frame and an open center frame.

This series of machine tools for the universal universal lathe, it is suitable for high-speed steel and carbide cutting tools for different materials of the shaft parts, cylindrical and disc-shaped parts, turning the outer circle, end, cut, cut, boring , Car boring inside and outside the cone, and can use the knife (through the wheel) turning length of less than 600 mm of various threads and other processes.




ITEM	UNIT	C61160	C61200	C61250
CAPACIYIES
Swing over bed	mm	1600	2000	2500
Swing over carriage	mm	1250	1600	2200
Max.length of workpiece	mm	3000~20000
Max.torque of face chuck	kg.m	8000
Formof bed guide way		3 GUIDE WAY
Span of guide way	mm	1600
Max.cutting force	kg	16000
Max.weight of workpiece	t	32
SPINDLE
Taper hole of spindle		75°
Dia.chuck D	mm	1600/1800/2000
Range of spindle speeds	r/min	0.8~160
No.of spindle speeds		STEPLESS
FEED
Feed motion level		18
Range of longitudinal feed	mm	0.125~48
Range of feed		0.063~24
Metric thread	mm	2~40
Inch thread	mm	1~14
Module thread	mm	1.5~20
TURRET
Max.travel of cross slide	mm	725/725/800
Max.travel of top slide	mm	600
Section of tool shank	mm	70
TAILSTOCK
Dia. of tailstock	mm	300
Travel of tailstock quill	mm	300
Taper hole of tailstock quill	mm	100(1:7)
Rapid speed of tailstock	mm/min	3000
Rapid speed of tailstock quill	mm/min	664
OTHERS
Main motor power	kw	75
Length	mm	13577~21577
Width	mm	2479/2479/2515
Height	mm	2280/2580/2655