Swing Dia.1250MM-2000MM(16t) Large Swing Diameter Heavy Duty Horizontal Conventional Lathe Machine

Product Detail

Ordinary heavy duty 10T manual machine description

This series of machine tools are mainly used to undertake all kinds of turning work, it can turn all kinds of parts of the end, cylindrical, bore and metric thread, inch thread, modulus thread, diameter thread. Can be used on the turret to cut the taper alone, but also can be used on the knife with the vertical feed with the long taper motor. In addition can also bear the drilling, nesting, boring and other processes. The machine power, rigidity, and can use carbide cutting tools for thread cutting, to process a variety of ferrous metals and non-ferrous metals.

C61125 / 16T is a basic product, the maximum diameter of the bed diameter of 1250mm.

C61160 / 16T is the basic type of high product, the maximum diameter of the bed diameter of 1600mm

C61180 / 16T is the basic type of high product, the maximum diameter of the bed diameter of 1800mm.

C61200 / 16T is the basic type of high product, the maximum diameter of the bed diameter of 2000mm.




ITEM	UNIT	C61125	C61160	C61180	C61200
CAPACITIES
Swing over bed	mm	1250	1600	1800	2000
Swing over carriage	mm	900	1250	1450	1650
Max.length of workpiece	mm	3000 4000 5000 6000 8000 10000 12000
Max.turning length	mm	2800 3800 4800 5800 7800 9800 11800
Pan of guideway	mm	1100
SPINDLE
Spindle nose	mm	A2-15
Spindle bore	mm	100
Taper hole of spindle		Metric140
Range of spindle speeds	r/min	Forward:3.15~315; Reverse:3.5~291
No.of spindle speeds	r/min	Forward:21 ;  Reverse:12
FEED
No.of Longitudinal and cross		56/56
Feed per revolution	mm	Longitudinal:0.1~12;Transverse:0.05~6;Up turret:0.025~3
No. and range of metric thread		44;1~120mm
No. and range of inch thread		31;28~1/4?
No. and range of module thread		45;0.5~60mm
No. and range of dia. thread		38;1/2~56DP
TURRET
Distance of centerline and tool resting plane	mm	53
Tool post swing range	°	±90°
Max.travel of cross slide	mm	740   850   900   900
Max.travel of top slide	mm	360
Section of tool shank	mm	50(380x380)
Travel of tool post (per turn of dials)	mm	0.05(0.002?)
TAILSTOCK
Dia. of tailstock	mm	260
Travel of tailstock quill	mm	300(12?)
Taper hole of tailstock quill		Metric80
OTHERS
Main motor power	kw	30
Length	mm	6120 7120 8120 9120 11120 13120 15120
Width	mm	2058 2130 2330 2430
Height	mm	2200 2380 2480 2580
Max.weight of workpiece	t	16